Adjuvant™ Cart

Purity and testing

Most supplement brands describe their testing. We would rather show you the results and let you read them yourself.

  • All

    Metals removed or not detected

    Lead, cadmium, arsenic, mercury, cobalt, copper, nickel, vanadium and silver, each at least 75x below the allowable limit. Every batch.

  • 1

    Ingredient to assay

    One material means one result set. A blend of five would need five separate assays.

  • =

    Result beside its limit

    A number without the limit it had to clear is not information. We publish both.

What we test for

Three things, on every batch. Potency, meaning how much quercetin the capsule actually contains against what the label says. Heavy metals, meaning lead, cadmium, arsenic, mercury, cobalt, copper, nickel, vanadium and silver, each against the limit that applies to supplements. And physical testing, meaning capsule weight, on a vegan cellulose capsule that opens quickly and digests easily.

A result on its own means very little. A result next to the limit it had to clear means something, which is why every row below carries both.

Results are not published yet

We are not going to print a purity figure before the certificate of analysis for the batch is in hand and linkable. When it is, the full table appears here, with every result beside the limit it had to clear and the lab named.

A brand that publishes a number it cannot show you the paperwork for is asking you to take its word. That is the thing this page exists not to do.

What each test is looking for

Potency, or identity and strength

Two questions, usually run together. Identity confirms the material is quercetin and not a cheaper flavonoid that looks similar on a basic assay. Strength measures how much is present against what the label claims. The usual method is high-performance liquid chromatography, which separates the compounds in a sample and measures each one, so an adulterated batch shows up as an extra peak rather than passing as a slightly weak one.

A result can legitimately come in above the label claim. Manufacturers overage slightly because potency degrades over shelf life, and a product at 100% on day one is under-label by expiry.

Heavy metals

Nine are tested here: lead, cadmium, arsenic and mercury, which is the set every supplement panel is expected to carry, plus cobalt, copper, nickel, vanadium and silver, which most do not run. They are not added to anything. Plants take up trace metals from soil and water, so some presence is unavoidable in any botanical ingredient, and the meaningful question is never whether any are present but how much against what limit.

Limits differ by jurisdiction and by whether the product is treated as a food or a supplement, which is one reason a bare number with no limit beside it is close to useless. California's Proposition 65 thresholds are stricter than most and are what many US supplement brands actually test against.

Physical testing

Capsule weight confirms fill consistency, so one capsule in a bottle is not appreciably different from another.

Disintegration is the one nobody discusses and the one that gates everything else. It measures whether the capsule opens within a set time under conditions meant to approximate the stomach. A capsule that does not disintegrate delivers nothing, no matter how pure its contents. A product can pass every potency and contaminant test and still fail to be a supplement in any useful sense.

What is often not tested, and should be

Microbial testing for total plate count, yeast, mould, and specific organisms. Residual solvents, if the extraction used any. Pesticide screening on the source botanical. None of these are exotic, and a certificate covering only potency has quietly answered the easiest question.

See the supplement

One ingredient, tested every batch.

Buy Now

How to read a certificate of analysis

Five things to check, roughly in the order they can invalidate the rest.

  1. Does the lot number match your bottle? If it does not, the document describes somebody else's batch. This is the most common way a certificate is technically real and practically meaningless.
  2. Is the laboratory named, and is it independent? An in-house result is not worthless, but it is a different kind of claim from an ISO-accredited third-party laboratory.
  3. Is the specification printed beside the result? A result column with no limit column requires you to already know the limit, which is a strange thing to expect of a reader.
  4. Is the method named? HPLC, ICP-MS and so on. Different methods have different detection limits, and "not detected" means nothing without knowing what the method could have detected.
  5. Is it dated, and how old is it? Certificates describe a batch at a point in time.

What cGMP does and does not tell you

Current Good Manufacturing Practice is a set of requirements covering how a facility operates: documentation, cleaning, staff training, equipment calibration, batch records. A cGMP-registered facility has committed to those processes and can be inspected against them.

What it does not tell you is anything about your bottle. It is a claim about a building and its procedures, not about a batch. A cGMP facility can still receive a poor raw material, and the thing that catches that is batch testing rather than the registration.

Both matter. They answer different questions, and a brand that leads with the facility certificate and never publishes a batch result has answered the easier one.

Why single-ingredient makes this answerable

A blend spreads the question across every component. If a capsule holds four actives and a flow agent, purity is four separate questions plus one nobody asks. Adjuvant is quercetin and the capsule. There is one material to test and one result to publish.

What we will claim

This is the purest quercetin we are aware of anywhere: 98%+ pure at 95%+ potency, in the anhydrous form, with no dilution and no additives. We have looked at what else is on the market and we have not found one that publishes better numbers. We publish ours, which is the part most brands leave out.

Common questions

What is a certificate of analysis?

A laboratory document reporting what a specific batch tested at, analyte by analyte, against the specification it had to meet. It is batch-specific, which is the property that matters. A certificate for a different lot tells you nothing about the bottle in your hand.

Why do heavy metals appear in a plant extract at all?

Plants take up trace metals from soil and water. Some presence is unavoidable in any botanical ingredient, which is why the meaningful question is never are there any but how much, against what limit.

What does third-party tested actually mean?

Less than it sounds, on its own. It can mean a facility was audited, a certifier was named, or a specific batch was assayed by an independent laboratory. Those are very different claims, and only the last one is about your bottle.

What is the capsule made of?

Vegan cellulose. It opens quickly and digests easily, which sounds like a small thing until you consider that a capsule that does not open delivers nothing, however pure its contents.

Why is your testing page empty?

Because the certificate for the batch is not in hand yet, and we would rather show you an empty table than a number we cannot evidence. When it arrives, every result appears here beside the limit it had to clear, with the laboratory named.

One ingredient. One set of results.

See what is in the capsule and how we test every batch.

Buy Now